The purpose of hydraulic cylinder factory acceptance testing is to demonstrate whether a specific product meets predefined acceptance criteria. Simply stating "tested" is insufficient for evaluation. It is necessary to understand which cylinder was tested, by what method, under what conditions, and with what results.
The most useful report for OEM purchasing teams is the one that addresses the technical requirement in the order. Not every test solves every question. Functional testing assesses leakage conditions, while leak checks evaluate the relevant requirements of the defined procedure. These results should not be interpreted as confirmation of all use cases on the actual vehicle.
Technical checklist
| Control area | Information to look for in the report | Comment limit |
|---|---|---|
| Product ID | Model and traceable number | Cannot be transferred to another model. |
| Pressure control | The applied conditions and results | It does not count as a permanent work permit. |
| Leakproof | Method, duration, and acceptance definition. | It does not cover all field temperatures. |
| Function | Movement and observed behavior | Vehicle integration alone does not approve it. |
Acceptance criteria should be determined before the test.
Selecting a seemingly acceptable result as the acceptance limit after the test is completed weakens the evaluation. The required controls, methods, and decision limits should be defined in advance in the technical specifications or approved test plan.
The plan varies depending on the product family, the cylinder's mode of operation, and the risks of the application. A universal test pressure or a waiting period applicable to all cylinders cannot be used. Standards provide a general framework for hydraulic system safety; the scope of the product procedure to be applied must be determined separately.
The report should include product and method identification.
The model, series, or batch linkage report matches the correct product. The drawing and procedure version explains which technical requirement was used. The test date, measuring instrument information, and evaluator's record also support subsequent review.
If the test was performed on only one sample, it should be clear how the results apply to the entire shipment. The scope of a sample test for design validation differs from the scope of a standard product check. The purchasing team should see this distinction at the beginning of the report.
Read the pressure result within its context.
A pressure value shown in a report does not necessarily indicate that it is the operating pressure. The purpose of the test and its duration must be known. Where the measurement was taken, the system temperature, and the control configuration also affect the interpretation.
For example, two reports might show the same pressure, but one might have a different holding time or a different product configuration. These results should not be compared as if they were obtained under the same conditions. If a technical comparison is to be made, a common test definition should be established, or the differences should be clearly stated in the report.
Leak resistance and function are evaluated together.
The leak test result is read according to the defined limits and observation method. It is important to understand which area and time period the "no leak" statement covers. Additionally, any jamming, irregularities, or unexpected behavior during the cylinder's movement is evaluated.
The operating behavior can be affected by connection conditions. Therefore, the product, which has been found suitable in the factory test, must be installed according to the assembly instructions. Hidromas' cylinder user manual is the primary reference document demonstrating that the usage and safety conditions are a continuation of the product evaluation.
How can you complete the incomplete report?
For example, let's say you receive a test document without a product number. Even though information about the test being performed is available, it might not be possible to link the document to a specific product. First, ask the manufacturer to establish this link. Instead of rewriting the result value, the record link needs to be explained.
Another deficiency is the lack of specification of the acceptance criteria. If the measured value is given but it is unclear within what limit the conformity decision was made, a specification reference should be requested. Once the explanation is complete, the updated version of the report should be linked to the previous record.
Transition from factory acceptance to on-site acceptance.
Factory acceptance encompasses the defined checks of the product. Integration assessment continues for hose routing on the vehicle, load distribution, chassis movement, and cycling conditions. Not combining these two steps into a single "suitable" statement keeps responsibilities clear.
During the technical discussion with Hidromas, you can define the expected test report along with your application drawing and acceptance requirements. This way, product selection, test scope, and delivery documents will be addressed in the same technical file.
Examine how the measurement setup affects the result.
The presence of a measurement value in the factory acceptance report does not automatically mean that value has the same meaning under all conditions. The point at which the pressure is measured, the temperature of the fluid used, and how the product is connected to the test setup can all affect the result. Therefore, basic explanations of the measurement setup are necessary to understand the report. Instead of requesting the complete, detailed laboratory file, it is more functional to identify the variables that influence the acceptance decision.
For example, in a leak test, visually observable external leakage and measured internal leakage are different findings. If a report states that no leakage was found, one should ask what type of leakage was checked. Similarly, a functional test does not necessarily indicate that the product has been tested over a long period of time across its entire load range. Matching the test title to the scope of the result prevents the report from being given a meaning it does not actually carry.
Separate individual product testing from design validation.
Acceptance testing applied to a product destined for shipment in mass production does not serve the same purpose as development testing, which evaluates the design of a product family. The former examines whether a specific product meets the defined delivery conditions. The latter may investigate broader load, cycle, or environmental conditions. If the purchasing team does not specify which report is required, one document may be submitted in place of the other, leading to a discrepancy in expectations.
This distinction is also important in sampling decisions. The results from a sample selected from a batch offer different levels of evidence than checking all products individually. Which method to apply is determined by the product's characteristics, risk, and agreed-upon quality plan. The report should indicate whether the inspection pertains to the entire shipment or only to the selected sample. It is not correct to silently generalize the results obtained from a sample to all products.
Describe the non-conformity and retesting process.
If a product is initially rejected, the correction and subsequent testing should appear in the same record chain. Only storing the final successful result makes it difficult to understand which problem was resolved. The correction process, replaced parts, and the scope of the re-test should be specified. This information can also contribute to the investigation of similar field findings in the future.
The conditions under which retesting is necessary should be explained in advance. For example, a measurement problem related to the test setup is not treated the same as a physical defect in the product. In the former, the validity of the measurement is investigated; in the latter, the effect of the correction on the product is evaluated. The final decision should be based not only on the values returning within limits, but also on the completion of the inspection in a reliable and traceable manner.
Prepare a usable acceptance summary for delivery.
A practical acceptance summary may consist of product identity, test plan version, baseline results, deviations, and outstanding issues. The assembly team can use this summary to understand which product has been released and which conditions will be further evaluated during on-site acceptance. Physical delivery and technical acceptance do not have to occur on the same day; the status must be clearly recorded.
Clarifying the required acceptance documents for Hidromas cylinders within the scope of the product and order reduces the need to search for missing reports later. Sharing the document request as early as possible ensures that the test plan is considered in conjunction with the production flow. This prevents purchasing, quality, and assembly teams from developing different and conflicting acceptance assumptions about the same product.
Frequently Asked Questions
Are all cylinders checked at the same test pressure?
No. The design and approved test procedure of the relevant model are taken into account. A general pressure rule should not be derived from the test values of different products.
Does the product that passed the test need to be tested in the vehicle?
The scope of integration and field acceptance is determined according to the project. Factory testing does not automatically validate all geometry and operating conditions of the vehicle.
Is the acceptance statement on the report sufficient?
Product identity is meaningful when linked to methodology and acceptance criteria. If these areas are missing, it must be clarified which requirement the result meets.
Technical resources
1. ISO 4413 General rules and safety scope for hydraulic systems.
2. Hidromas telescopic cylinder user manual
Hidromas products and technical support
Last Posts
- Is it better to overhaul or replace a hydraulic cylinder?
- How are pressure, flow rate, and temperature interpreted together in hydraulic fault diagnosis?
- Why Sensor Accuracy and Calibration are Important in Hydraulic Pressure Measurement
- Tipper Body Creeping Down: Cylinder or Valve Leakage?
- How to Evaluate Flow Rate Loss Under Load in a Hydraulic Pump






