Cylinder Chrome Plating and Corrosion Testing | Hidromas

How to Evaluate Chrome Plating Thickness and Corrosion Testing Together

How to Evaluate Chrome Plating Thickness and Corrosion Testing Together — Hidromas

Chrome plating thickness and corrosion testing evaluate different properties of the hydraulic cylinder surface. Thickness measurement indicates the dimensional state of the coating, while corrosion testing shows its behavior under defined test conditions. A sound decision requires interpreting these two results in conjunction with surface integrity and operating conditions.

Ranking a product solely based on coating thickness or test hours during the purchasing process constitutes an incomplete assessment. Coating durability, measurement points, sample preparation, and acceptance criteria must also be known. In particular, directly converting laboratory time to field service life is incorrect.

Technical checklist

Data The question he answered A question that he/she cannot answer alone.
Coating thickness How much pavement is there in the measured area? Is the entire surface flawless?
Surface inspection Are there any apparent discontinuities or damages? What is long-term field life?
Corrosion test How did the sample behave in the experiment? How many years of use does it provide?
Field conditions What effects is the product exposed to? Is it exactly equivalent to the laboratory result?

What information does thickness measurement provide?

Coating thickness is a result of the measurement method used and the area measured. The distribution may not be the same in different areas of the part. Therefore, the report should include the measurement points, method, and relevant drawing boundaries.

Obtaining a satisfactory value at a single point does not indicate that the entire surface is of uniform thickness. Furthermore, a satisfactory thickness does not prove the absence of scratches or localized discontinuities on the surface. The measurement should be interpreted in conjunction with visual and other necessary surface inspections.

What is the scope of corrosion testing?

Salt spray tests, for example, examine the behavior of a sample under specific conditions and methods. ISO 9227 defines the setup, solution, and scope of application for salt spray tests. The product-specific exposure time and interpretation of results must be determined in accordance with the relevant product requirements.

The test report must clearly state the method used, the sample description, and the evaluation method. Results from different experimental methods cannot be compared as if they were the same condition. It should also be specified which surface or coating system the test represents.

Why isn't test time converted to years?

In a field environment, salt, humidity, temperature variations, cleaning chemicals, and mechanical damage can all have an effect. Laboratory experiments examine only a specific portion of these factors under controlled conditions. Therefore, it should not be claimed that a result obtained in a specific number of hours translates to a specific number of years of durability.

The scope description of ISO 9227 also states that salt spray results should not be used to directly predict long-term corrosion resistance or to generally rank different materials. The report should be evaluated within its own method and sample limitations.

How to compare two coating reports.

First, check if the sample material, surface preparation, and coating system are comparable. Then, look at the method, duration, and acceptance definition. If one report is based on the first observed corrosion and another on a different surface area criterion, the numbers do not mean the same thing.

Let's assume two hypothetical supply files have the same test duration. In one, the sample edges may have been prepared differently or the surface may have been evaluated differently. The technical team should not conclude that there is "equal strength" without explaining this difference. The comparison matrix should highlight these differences.

How is the coating affected during use?

Mechanical impact, friction, or improper cleaning can damage the coated surface. The original surface condition is not maintained in damaged areas. Therefore, the laboratory result does not mean that usage and maintenance instructions are unnecessary.

The location of the corrosion, the working position, the storage conditions, and the surface damage should all be recorded during the field inspection. Photographs showing the general view and close detail are helpful. Uncontrolled grinding or polishing of the damaged surface can complicate subsequent technical evaluation.

What information should be included in the purchase request?

Describe the coating requirement with the measurement method, acceptance limit, and necessary test report. Explain the actual usage environment; do not request a quote based solely on the phrase "corrosion resistant." The required technical scope may vary depending on the product family.

You can request a technical evaluation for Hidromas cylinders, including model and application information. Discussing coating and surface requirements based on current product data ensures accurate definition of expectations.

Separate the average thickness from the local distribution.

While the average thickness of the coating may appear satisfactory, different results may be obtained in specific areas. Part geometry, processing conditions, and measurement method influence the interpretation of the distribution. Therefore, the report should explain not only the average but also how critical regions were selected. The technical specifications should specify which measurement was used as the basis for the acceptance decision. If there are areas that the method used cannot reach, this limitation should also be stated.

The dimensions of the finished surface are also evaluated along with the coating. Requesting more coating is not a quality demand independent of other design dimensions. Subsequent surface treatments and sealing requirements determine the final state. When a thickness change is proposed, it may be necessary to review not only the coating report but also the part dimensions and the operating conditions with the seal.

Ask how the test sample represents the actual product.

The sample used in a corrosion test can be a flat plate, a separate test piece, or a specific section of the finished product. Each option provides different information. If the sample's manufacturing material and connection to the coating process are not explained, the result remains unclear in terms of the cylinder to be purchased. The test report should include the sample's identity, its preparation method, and the scope of production it represents.

Protecting the edges or specific areas of the sample may alter the assessment area. This may be appropriate within the scope of the application method; however, it must be clearly stated in the report. When comparing two results, it is checked that the same surface areas and the same damage definition are used. In this way, methodological differences hidden under a single hour value become visible, and the procurement decision is based on a more understandable foundation.

Identify surface risks during transportation and storage.

Even if the product leaves the factory with a suitable surface, contact, moisture, or packaging movement during shipment can create new effects. The integrity of the protective packaging and the securing of the product are therefore important. A photograph of any stain or scratch observed upon delivery should be recorded along with the packaging condition and product identification. Documenting the finding before surface cleaning facilitates further investigation.

When storage periods are extended, it is checked whether the initial preservation conditions are maintained. Humidity, temperature changes, and exposure of the product to external factors are evaluated. Storage precautions should be determined according to the relevant manufacturer's instructions. Using preservative chemicals randomly may create incompatibility with sealing materials or surface requirements. The preservation method should also be part of the technical file.

Examine the field finding separately from the coating defect.

It is important to determine whether the corroded area is on a moving surface, a point subjected to mechanical impact, or an exposed section in the storage area. Without knowledge of the location and usage history, definitive conclusions about manufacturing origins should not be drawn based solely on images. Conversely, not every finding can be assumed to be user-caused. The investigation should bring together records supporting different possibilities.

The application for Hidromas can include model information, delivery date, storage conditions, and a close-up image of the surface. If available, previous coating or acceptance reports should also be included in the same file. This allows for a comparison of laboratory evidence with actual usage findings within their respective contexts. The final decision is based not on marketing claims or a single test period, but on the actual condition of the product and the relevant technical requirements.

Frequently Asked Questions

Is a thicker coating always better?

A general rule of superiority cannot be established. Size, surface quality, coating process, and sealing requirements must be evaluated together. The acceptable limit of the relevant design shall be taken as the basis.

Does salt spray damage determine the warranty period?

It doesn't determine it alone. The warranty is based on the contract and product terms. Laboratory testing demonstrates the technical behavior under specific conditions.

How should a small surface stain be evaluated?

The nature, location, and relationship of the stain to the coating must be examined. Contacting the manufacturer with a photograph and information about the working conditions is a more accurate starting point than random surface intervention.

Technical resources

1. Scope of ISO 9227 salt spray tests

2. Hidromas telescopic cylinder product family

Hidromas products and technical support

Contact us

We are here to answer your questions and for co-operation opportunities. Get in touch now and we will find the best solution for you!