Hydraulic Cylinder Welding Quality Control | Hidromas

How to Perform Quality Control on Welded Hydraulic Cylinder Components

How to Perform Quality Control on Welded Hydraulic Cylinder Components — Hidromas

Quality control in welded hydraulic cylinder components evaluates whether the connection has been manufactured to meet the design requirements. The inspection includes a combination of technical drawings, welding procedures, process records, and appropriate inspection methods. A visually smooth weld alone does not prove all the necessary specifications.

This applies only to parts with welded joints in their design. It should not be assumed that all components of every cylinder are welded. The control plan should be determined based on the load-bearing function of the relevant part and the product design.

Technical checklist

Control layer The subject under examination The information it provides
Technical drawing Combination and size requirements What will be produced
Process record Materials and methods used How it is produced
Visual examination Accessible surface and form. Visible findings
Non-destructive testing Discontinuities detected by the chosen method Results within the scope of the method

The control plan starts with the drawing.

The weld location, joint type, dimensions, and acceptance requirements are defined in the technical drawing or approved manufacturing document. It must be known before production which feature the inspection team will evaluate. A vague expression like "good weld" does not constitute a measurable acceptance condition.

In hydraulic systems, the relationship between design, manufacturing, and safety is evaluated within a broad framework. Welding control should also be considered within this holistic approach, and general rules taken from other products should not be applied to the relevant component without question.

What does the process log show?

Material description, method used, and relevant procedure version are the basic entries in the production record. Personnel qualifications and application conditions are also monitored where necessary. These records help to understand under what production conditions the inspection result was obtained.

Changes made during production must not be left unrecorded. Any deviation from the approved method must be evaluated for technical impact. Two combinations that produce the same appearance may have been manufactured under different preparation or processing conditions; process equivalence cannot be established solely by looking at a photograph.

What are the limits of visual examination?

Visual inspection provides information about accessible surfaces, shapes, and specific external features. It does not show the entire internal structure. Lighting, accessibility, and surface cleanliness affect the quality of the inspection. The inspection result should not be recorded simply as "inspected."

The need for additional methods depends on the design requirements and the type of potential defect. Not every non-destructive testing method detects all defects with the same sensitivity. Material, geometry, and access conditions influence method selection. The scope and acceptance criteria of the method used should be explained as well as its name.

Why is measurement control also necessary?

The geometry or joint position of the part may change after the welding process. Accepting the weld surface does not automatically mean that the assembly dimensions are also satisfactory. Critical joint centers and surface relationships should be evaluated according to the drawing.

Geometric deviations in the cylinder connection can affect the axial alignment of the vehicle. Therefore, production control and assembly conformity must be linked. The measurement report should specify which reference surface was used.

How to handle field weld repair

Welding a damaged joint is not a general repair procedure. First, the function of the part, the cause of the damage, and the manufacturer's repair limits must be determined. The Hidromas user manual states that welding operations should be carried out by trained and experienced personnel.

If a repair decision is made, the scope of preparation, method, and post-processing acceptance must be defined. Uncontrolled work should not be performed on pressurized or load-bearing systems. The effect of welding current and spatter on other components should also be evaluated in the relevant safety procedure.

What questions are asked in the case of a repeating failure?

Let's hypothetically assume a new crack appears in the same joint area. The inspection doesn't focus solely on the last weld seam. The load condition, assembly alignment, material, and previous repair history are also investigated. The location of the damage alone does not determine its cause.

Repeat repairs performed without understanding the root cause can complicate the product history. Photographs, inspection records, and replaced parts should be stored under the same product ID. The effectiveness of the corrective action should be evaluated using a defined acceptance and follow-up plan.

How to transfer to purchase file

In a project requiring welded parts, clarify which inspection documents are needed before ordering. Instead of imposing the same inspection package on every product, define the scope appropriate to the part's design. Submitting the drawing, usage conditions, and documentation requirements together during the Hidromas technical meeting will help establish this scope correctly.

Include access control during production in the plan.

A welded area may not be easily visible after assembly is complete. Therefore, the production stage at which the inspection will be carried out must be determined in advance. Leaving the inspection of an inaccessible surface after final assembly to the delivery date can make it difficult to obtain the necessary evidence. The inspection plan should specify not only which method will be used but also when the process will be performed.

Intermediate inspection results should be associated with the product identity. If the next process will alter the appearance of the source area, the previous record should indicate the condition under which the inspection was performed. Paint or coating application may obscure some surface findings. Therefore, ensuring a smooth final appearance does not render records of previous production steps unnecessary. The documents represent different, complementary inspection stages.

Review the geometric consequences of the thermal effect.

Thermal effects generated around the welding process can alter the dimensions and alignment of the part. Accepting the surface alignment of the joint does not automatically mean that the assembly centers or reference surfaces are also satisfactory. Dimensions considered critical in the technical drawing must be checked using appropriate methods after the process. Connection axes and mating surfaces are particularly important for ensuring the load is transferred as designed.

When taking measurements, it is essential to understand in which fixture and under what temperature conditions the part is being evaluated. The behavior of a part forcibly aligned with a clamping system may differ from its behavior in the free state. The control method should be determined according to the relevant production plan; simply fitting into place during assembly should not be interpreted as fulfilling all dimensional requirements. If there is a discrepancy, the effect of the correction process on other properties of the part should also be examined.

Connect the inspection findings to the technical acceptance criteria.

An examination method may exhibit discontinuity; whether this is acceptable is assessed according to the relevant specification. The method is not expected to show every finding at the same level of significance. The location, magnitude, and function of the combination of findings play a role in the evaluation. The person reading the report should see not only the name of the method but also the accepted reference used.

For example, requesting further inspection for a visible mark on the surface does not automatically mean the part is scrapped. Similarly, the absence of visible marks does not prove the complete internal integrity of the system. The decision should be limited to the features covered by the inspection plan. If assembly or shipment is to proceed without resolving the uncertainty, its technical feasibility must be further assessed.

Keep the repair history visible in the product record.

The location, method, and final inspection of any repairs performed during production must be recorded. If the same area has been processed multiple times, preserving previous records is important. This information helps in subsequent field inspections to determine whether the finding is new or related to past operations. A photograph of the final appearance alone will not reveal this history.

In a technical discussion with Hidromas regarding a welded component, the requested evidence should be determined according to the relevant product design. Instead of unnecessary document clutter, a connection should be established between the drawing, the applied inspection, and the product identity. Such a file supports both the purchasing decision and any potential post-assembly inspection. The value of the inspection lies not in the quantity of documents, but in its ability to provide a traceable answer to the right question.

Frequently Asked Questions

Is a seemingly legitimate source sufficient evidence?

Appearance is only one aspect of the evaluation. Relevant drawing, process, and inspection requirements must be met. Conformity to internal structure or dimensions cannot be inferred from appearance alone.

Is the same examination method applied to every session?

No. Materials, geometry, access, and the findings investigated influence the choice of methodology. The control plan should be prepared according to the relevant design.

Is it possible to reinforce the site using welding?

A general strengthening plan cannot be recommended without manufacturer and engineering assessment. The process may alter the load path and material behavior.

Technical resources

1. ISO 4413 General rules and safety scope for hydraulic systems.

2. Hidromas telescopic cylinder user manual

Hidromas products and technical support

Contact us

We are here to answer your questions and for co-operation opportunities. Get in touch now and we will find the best solution for you!