Hydraulic Cylinder Fatigue Test Report | Hidromas

How to Read a Hydraulic Cylinder Fatigue Test Report

How to Read a Hydraulic Cylinder Fatigue Test Report — Hidromas

A hydraulic cylinder fatigue test report describes the behavior of the specimen under defined repetitive load conditions. To interpret the report, in addition to the number of cycles, the magnitude of the load, the type of load variation, the connection condition, and the acceptance criteria must be known. A high number of cycles alone does not guarantee the same service life in different applications.

For OEM and quality teams, the fundamental question is what load condition the experiment represents in real-world application. Turning results into sales promises without establishing a connection between sample testing and field use goes beyond technical understanding. Reliability assessment must be conducted in conjunction with the scope and uncertainty of the data.

Technical checklist

Report area The description to be sought Uncertainty arises if something is missing.
Sample Model and design version Which product does the result belong to?
Charge spectrum Upper and lower levels and repetition pattern What is its relationship to field conditions?
Connection Support and assembly during testing. Is it comparable to the real vehicle?
Acceptance criteria Damage and stopping definition What does successful outcome mean?

Distinguish between fatigue and one-time endurance.

A structure's ability to withstand a single load is different from its ability to withstand the same load pattern repeatedly. Repeated loads can create different failure processes in materials and connections. Therefore, static acceptance testing does not replace fatigue assessment.

Pressure cycles, axial forces, and connection loads on a cylinder can create different test scopes. The report should clearly state which quantity was tested. Simply seeing the name of the test does not guarantee that all critical parts and connections were evaluated in the same way.

How is a cycle defined?

A cycle is the defined variation of load or pressure between specified lower and upper levels. However, the lifting, holding, and lowering phases in actual tipper body operation can have different durations and effects. The test cycle should not be considered the same as the daily work cycle.

The load waveform, frequency, and dwell times are also part of the report. It should be explained what the changes made to speed up the test represent. An accelerated experiment cannot be translated into actual runtime without specifying the methods and assumptions used.

Which samples does the test result cover?

An experiment with a single sample provides information about a specific product. If generalizations are to be made about all dimensions of a product family or production distribution, it should be explained how the experimental design supports this. Sample size and selection are key inputs for interpreting the results.

The report should clearly state whether the experiment was completed, whether the target cycle was reached, or whether it was stopped due to a finding. Reaching the target cycle without damage does not mean the product has reached the end of its life cycle at that point; it only indicates that the experiment reached its defined limit.

Why might field load behave differently?

In a real vehicle, load distribution, ground conditions, temperature, mounting deviations, and usage habits all have a combined effect. A lateral load or impact that is not represented by the laboratory test may create a different damage mechanism. The test result does not automatically account for these conditions.

For example, two fleets operating with similar tonnage may have the same number of cycles. One might have a more consistent load and terrain, while the other might have a different load distribution. Estimating the service life based solely on the cycle count will overlook these differences.

What questions should be asked in a purchase comparison?

Question the relationship between the model being tested and the product being offered. The test standard or company procedure, sample status, and acceptance scope should be explained. Evaluate comparable evidence under the same load conditions, rather than a table that scores cycle counts alone.

If there is a design revision, it should be clarified on what grounds the previous experiment represents the new product. Changes in material, bonding, or surface treatment may necessitate a reassessment of the results. This decision depends on the technical impact of the change.

How should fatigue evidence be used in the technical file?

Include the fatigue report in the application information, drawing version, and other acceptance records. Briefly describe the question the report answers. Do not include service life or warranty claims it does not support.

In your product evaluation for Hidromas, you can share the expected operating cycle and load conditions. Considering the technical data of the relevant model together with the necessary test evidence will ensure a more informed purchasing decision.

See how the damage definition changed the experimental result.

In a fatigue test, the stopping criteria can be visible cracks, a specific leakage level, loss of function, or another technical finding. Using different criteria does not necessarily mean the same number of cycles and the same level of success. Therefore, the report should explain how the damage was identified and at what intervals it was checked. Definitive conclusions should not be drawn later about a characteristic not monitored during the test.

The fact that only one part of the product is functioning at the end of the test does not mean that all parts remain in their initial condition. The scope of the post-test inspection should also be specified. Dimensional changes, surface condition, or findings at the joints may have been evaluated. Knowing which checks were performed helps to understand how much information the report provides in terms of product selection and maintenance planning.

Relate the load spectrum to the actual task.

Not all cycles in the field may occur at the same load level. A vehicle may operate mostly with a light load, and at other times under heavier conditions. How this distribution is represented in the experiment should be questioned. Using only the average load can reduce the visibility of a small number of potentially impactful events. Having real operational data provides a useful starting point for interpreting the test design.

In new projects where field data is unavailable, assumptions must be clearly stated. The expected task type, cycle frequency, and environmental conditions are defined together. When assumptions change, it is re-evaluated whether the previous test represents the new use case. Instead of converting the experimental result into a general lifecycle statement for the product family, explaining which task definition it addresses creates more accurate technical communication.

Read the sample size and production scope together.

The result of a single sample provides information about the behavior of that sample. The adequacy of sample selection and data quantity is also examined to assess variability in production. Samples may be selected from different production periods, sizes, or material groups. A report should not be claimed to represent all product ranges without clarifying this scope.

It is also important whether the sample is a specially designed development product or a product from mass production. Design similarity does not necessarily mean that the production conditions are exactly the same. If the product is subsequently revised, the validity of the previous experiment is technically evaluated for the changed material, connection, or process. Additional checks are planned if necessary; this decision is not made solely based on the date of the file.

Maintain the quality of evidence in purchase ratings.

In supplier comparisons, giving too much weight to cycle count while ignoring other conditions can lead to a misleading ranking. First, it must be verified that the experiments are comparable. If the load level, connection configuration, temperature, and acceptance criteria differ, the results should not be presented as directly competing numbers in the same column. The technical impact of these differences should be evaluated separately.

In Hidromas product evaluation, clearly defining the expected use makes it easier to determine which test evidence is meaningful. The conditions covered by the test can be kept separate from the conditions to be checked in the field. Thus, the fatigue report provides strong technical input to the purchasing decision; however, it does not become an unlimited guarantee replacing vehicle geometry, proper assembly, and operating instructions.

Frequently Asked Questions

Does one million test cycles equal one million field cycles?

It cannot be interpreted directly in this way. The cycle definition, load spectrum, and field conditions must be compared. The given number only makes sense within the scope of the experiment.

Has the sample reached the end of its lifespan after reaching the target cycle?

No. The experiment may have been stopped at that point. The cycle in which the objective is achieved and the cycle in which the damage occurs are different types of outcomes.

Can the old report be used for the new design?

It depends on the impact of the change. The technical team must justify whether the previous experiment represents the new design. Version similarity alone is not sufficient.

Technical resources

1. NIST product safety assessment

2. Hidromas telescopic cylinder product family

Hidromas products and technical support

Contact us

We are here to answer your questions and for co-operation opportunities. Get in touch now and we will find the best solution for you!